FMB - FZS Saw cutting machine for aluminum profiles

Used FMB FSZ - sawing machine for processing of aluminum profiles

Two plants available



Single Head Type MATA PC

• Made with sturdy welded frame design consisting essentially of :
• Security guard
• spray system
• 2 pcs clamping device ( Einf. acting cyl. 40mm dia. Stroke 100mm ) horizontal profile clamping
• 2 pcs clamping device ( Einf. acting cyl. 40mm dia. Stroke 100mm ) vertical profile clamping
• Independently controllable sections of the clamping devices
• Automatic positioning of 45 ° / 90 / -45 ° intermediates manually. It is controlled from the program
• PC - Control
• 1 each of the annular nozzle Profilein and outlet to blow off chips that are on the profile surface , chips can not be blown off completely residue free .
• 2 pcs nozzles at the back of the machine table to blow chips that lie loosely on the table . Chips can not be completely residue -free blown
• Discharge route about 4,000 mm ( roller conveyor with plastic rollers , roller spacing 180 mm , with metal sheets between the rollers)
• Waste opening approx 120 x 160mm
• 3 stage cutting depth control with the following main data:
  • Blade diameter . 450 mm
  • Specify orifice . 30 mm
  • Saw motor 2,2 KW
  • Speed ​​Min 2.800
  • Air pressure 6 bar
  • Air consumption L / cycle 50
  • Max Cutting . m / sec 85
  • Feed speed . mm / sec max. 60 Suction 85 mm
  • Aut miter 45 ° / 90 I -45 °
  • Miter adjustment on both sides
  • Weight Kg 580
• Automatic Feeder ( for transport profile ) with pneumatic adjustable transport rollers ( support table )
• Roll width 150 -200 mm roller spacing adjusted to distances of the template magazine.
• with the following main data:
  • Track 6,200 mm
  • Engine ballscrew
  • Drive motor AC servo motor
  • Positioning, mm / m + / - 00:05
  • Feed speed m / min 40 max (profile -dependent)
  • Approach speed m / min 60 max
  • Pneumatic gripper tongs Stroke 120 mm 6 bar
  • air pressure
• Template magazine ( cross conveyor ) for feeder
  • For material submission
  • Plastic stoppers fitted on chain approx 50 mm high
  • Retractable roller conveyor roller width 150 mm wide
  • Role distance depends on division of the transverse conveyor
  • Bandgap 200 , 600, 1,350 , 2,350 , 3,550 , 5,300 mm
  • Plastic chain smooth, max. Machine depth of 2.500mm
  • Sequential control of the feed
  • Stop bolt for loading
• Abförder track 4,000 mm by driven rollers
  • Roll width 200 mm
  • Cross conveyor ( plastic chain smooth) length approx 2,500 mm
  • Distance 200 , 600, 1.350, 2.350, 3.550mm
  • Sequential control of the feed
  • If track filled , stop the entire system .
• Security fence on the left and right of the system with maintenance access on left side (total about 7,000 mm ) .
• PC - Control