WAFIOS - FTU 3.3-98 CNC coiling and bending center

Used WAFIOS FTU 3.3-98 - CNC wire bending machine with decoiler & Robot

for the manufacture of springs and 3-D bending parts in the winding and winds process

Wire diameter: 1.5 - 6.0 mm dispense with some additional tools.

Technical specifications

Workspace The winds method

• Wire diameter
  • <2000 N / mm2 1, 5 - 3,0 mm
  • <1600 N / mm2 strength 1,5 - 3.5mm
  • <1200 N / mm2 1, from 5 to 4.0 mm
  • <800 N / mm2 1,5 - 5,0 mm
  • <600 N / mm2 strength from 1.5 to 6.0 mm
• Wire feed length - unlimited
• Feed speed max. - 40 m / min.
• Resolution of the axis control
  • X-axis (control shafts) 0.1 degree
  • Y-axis (Wrap) 1/1000 rev. = 0.36 degrees
  • Z-axis (pitch) 0.001 mm
  • C-axis (feed, wire feed) 0.001 mm
  • A-axis (feed, turning) 0.1 degrees
  • O-axis (average) 0.1 degrees
• Working height 1200 mm to center wire feeder
• Performance Up to 80 pieces / min, depending on size and shape of the part
• Air consumption approx 1-30 l / min at 6 bar, depending on accessories
• Noise approximately 72.5 dB (A)
• Footprint machine cabinet, but without reel BTH approx 2300 x 2500 x 2400 mm